--1/2”x 3 1/4“ (12.7 mm x 82.55 mm). - All planks are random length from 12” to 60 “. Average plank length is about 22” (0.6 m). - Tongue-and-groove profile. Microbevel on all 4 sides.
Construction:
-- 4 mm ultra-thick hardwood top layer. Can be sanded up to 4 times. COSWICK uses only sawn lamellas for top layer. Sawn hardwood veneers have no internal checks that might cause face splits in lamella later on. Sawn hardwood lamellas have rich natural appearance of solid wood. - Plywood core consists of 7 cross layers of birch. Grooves on bottom side enhance boards’ flexibility, making installation effortless. - High-adhesion polyurethane glues are used to bond top hardwood veneer to a plywood base. Extra strong bonding guarantees no delamination even under elevated moisture conditions. Polyurethane adhesives have low emission and are environmentally friendly.
Properties:
-- COSWICK 2-layer Engineered hardwood floors maintain its geometry in wide range of variation of relative humidity. Seasonal movements in floors are minimal. - Can be nailed down to a wood subfloor, glued down over concrete, or floated. - Can be glued down over concrete with radiant heat system. - For installation above, on and below grade.
INSTALLATION
