Waterborne wood stain

Waterborne wood stain is a composition of urethane polymers and micronised pigments designed specifically for wood toning.

BENEFITS:

Easy to use;
Water-borne;
Minimizes the appearance of blotchy finish;
Provides even toning of the whole surface;
Allows to get a solid, bright tone.

Technical data

Product name	Waterborne wood stain for wood toning
TDS	TDS (PDF)
Packing	0,5 kg
Consumption	30 – 40 g/m² for a single layer
Box pcs	16 pcs.
Tray pcs	512 pcs.
Manufacturing standard	TУ BY 101040134.004-2015

Application and storage properties

Readiness condition	Ready to use
Time to dry	When applying one layer — 4 hours. When applying two layers — first layer – 1 hour. Second layer – 6 hours.
Shelf life	12 months
Storage and transportation conditions	Keep tightly closed at temperature +5°С to +25°С. Keep container dry. Avoid direct sunlight and exposure to temperatures below +5°С.

Safety requirements:
For intended use only. Avoid contact with skin and mucous membranes. Keep out of reach of children.

Disposal:
This material and its container must be disposed of in accordance with the requirements of legislation on environmental protection and materials disposal.

Description and application

Description

Woterborne wood stain is a composition of urethane polymers and micronised pigments specifically developed for wood toning.
The wood stain is designed for decorative coloring of non-finished, sanded wooden surfaces: wooden and hardwood floors, stairs, furniture and other wooden items.

APPLICATION

PRELIMINARY WORKS:

Sand the surface with an abrasive material with a grit size of 120 — 150.
Clean the floor from dust and litter using a vacuum-cleaner.
It is recommended to provide the following climatic conditions: temperature from +18°С to +25°С, relative air humidity 40 — 60 %. It is necessary to ensure a good air flow during the whole application and drying process.

MANUAL APPLICATION

Important! Shake well before use. It is recommended to preliminary test the wood stain on a small sample or a part of sanded surface in order to see the actual finish color.

Apply the wood stain with a rubber trowel distributing it evenly on the surface.
After an application rub the wood stain with rugs to the surface removing the excess.
When the first layer is dry, apply the second layer in the same way.
Time to dry:
When applying one layer — 4 hours.
When applying two layers:
first layer – 1 hour;
second layer – 6 hours.

MECHANICAL APPLICATION

Important! Shake well before use. It is recommended to test the wood stain on a small sample of grinded wood to define the surface color.

Apply the wood stain with a rubber trowel distributing it evenly on the surface.
Remove the wood stain excess with cotton rags. Rub the wood stain with a single-disk white pad buffing machine.
When the first layer is dried out, apply the second layer in the same way.
Time to dry:
When applying one layer — 4 hours.
When applying two layers:
first layer — 1 hour;
second layer – 6 hours.