Polyurethane primer Coswick F02 PRIME

Polyurethane primer Coswick F02 Prime is a waterless PU-resin based compound.

BENEFITS:

Reinforces base layer;
Does not contain water and solvents;
Increases adhesion to the ﬂoor and decreases adhesive consumption;
Can be used over underfloor heating systems.

Technical data

Reference	4290-030000
TDS	TDS (PDF)
Product name	Polyurethane primer Coswick F02 PRIME
Category	Materials for glue-down hardwood flooring installation
Packing	5.0 kg
Consumption	100 — 150 g/m2 for one layer
Tray pcs	90 pcs.
Manufacturing standard	СТБ 1263-2001

Physical and chemical properties

Physical and chemical properties	Density 1.4 g/cm3
Color	Brown liquid
Readiness condition	Ready to use
Time to dry	2 hours at the temperature of +20°C
Shelf life	12 months
Storage and transportation conditions	Keep tightly closed at temperature +5°С to +25°С. Keep container dry. Avoid direct sunlight and exposure to temperatures below +5°С.

Safety requirements:
For intended use only. Avoid contact with skin and mucous membranes. Keep out of reach of children.

Disposal:
This material and its container must be disposed of in accordance with the requirements of legislation on environmental protection and materials disposal.

Description and application

PRODUCT DESCRIPTION

Primer is designed to fortify porous mineral surfaces (concrete, cement, particle and OSB boards, calcium-sulphate and xylolite screeds) when installing hardwood ﬂooring with any type of adhesives.

APPLICATION

Remove old finishes (paint, wallpapers, dirt, etc.) if any.
Apply the primer with a brush, applicator roll or a spray gun over the base layer in conditions of air temperature between +5°С and +30°С.
Loose surfaces shall be primed twice within at least 2 hours.
Time to dry: 2 hours for one layer at the air temperature of +20 °С.

Important! Flooring has to be glued down not later than 48 hours after priming.

TOOLS CLEANING:
Tools are easily cleaned with acetone.

Technical documentation

Technical data sheet (TDS)

Safety data sheet (MSDS)

Application manual

Marketing authorization certificate

Certificate of conformance

Components

Component	Description
Modified polyurethane prepolymer	Waterless. The primer is an air-dry mix that reinforces the base and creates a solid and firm surface for the hardwood flooring installation.